National Public Seating Archives - Good Game & Recreation Room Furniture Solution

NPS 30″ x 72″ Heavy Duty Folding Table, Speckled Gray Review

This fits your .

Make sure this fits by entering your model number.

72″ long rectangular plastic folding table with steel frame for temporary placement and compact storage when not in use
Gravity locks keep table legs open when upright, and slide out of the way for folding
Speckled gray blow molded plastic table top is 1-3/4″ thick, can withstand heat up to 212 degrees F, and is UV protected to withstand sunlight during outdoor use
17 gauge steel frame, with 18 gauge steel legs, supports 1,000 lb. of evenly distributed weight
Folded legs nest flush into table, making a flat surface suitable for stacking for compact storage

Size:30″ X 72″

The National Public Seating BT3000 Series steel frame rectangular blow molded plastic top folding table has a speckled gray, 72″ long, 1-3/4″ thick, UV protected, blow molded plastic table top, a steel frame that can support 1,000 lb. of evenly distributed weight, and folds for compact storage when not in use. The blow molded plastic top has a better strength-to-weight ratio than solid plastic or wood tables, is UV protected to withstand sunlight during outdoor use, and can withstand heat up to 212 degrees F so it won’t be damaged by hot plates or coffee cups. The surface is lightly textured to increase scratch resistance, but is still smooth enough to write on. The gray steel legs are powder coated for corrosion resistance. When the legs are opened, gravity lock rings engage to keep table legs open when upright, and slide out of the way for folding. When folded, the legs nest flush into indentations in the bottom of the table, making a flat surface suitable for stacking multiple tables for compact storage. Plastic glides on the feet help protect floor surfaces.

The table is Materials Analytical Services (MAS) certified as low volatile organic compound (VOC) emitting furniture according to the criteria defined by U.S. Green Building Council (USGBC) Leadership in Energy & Environmental Design (LEED) 2009 for Schools, LEED 2009 for Commercial Interiors, ANSI/BIFMA X7.1-2011, ANSI/BIFMA e3-2011e Furniture Sustainability Standard – Section 7.6.1 and 7.6.2, Collaborative for High Performance Schools (CHPS) EQ2.2.5, and the MAS Certified Green program. This table meets the Americans with Disabilities Act of 1990 (ADA) Standards for Accessible Design.

Specifications

Overall dimensions, open	29-1/2 x 72 x 30 inches (H x W x D)
Weight supported	1,000 lb.
Frame material	17 gauge steel
Leg material	18 gauge steel
Weight	35 lb.

(H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)

National Public Seating manufactures furniture and associated transport and storage accessories for educational, worship, hospitality, food service, and other institutional venues. The company, founded in 1997, is headquartered in Clifton, NJ.

NPS 18″ x 60″ Heavy Duty Seminar Folding Table, Speckled Gray, 700 lb Capacity Review

This fits your .

Make sure this fits by entering your model number.

60″ long rectangular plastic folding table with steel frame for temporary placement and compact storage when not in use
18″ depth seminar size, with cantilevered legs connected 11″ from the table edge to provide leg room
Speckled gray blow molded plastic table top is 2″ thick, can withstand heat up to 212 degrees F, and is UV protected to withstand sunlight during outdoor use
18 gauge steel frame, with 16 gauge steel legs, supports 700 lb. of evenly distributed weight
Folded legs nest flush into table, making a flat surface suitable for stacking for compact storage

Size:5 Foot

The National Public Seating BT1800 Series steel frame rectangular seminar blow molded plastic top folding table has a speckled gray, 60″ long, 2″ thick, UV protected, blow molded plastic table top, a steel frame that can support 700 lb. of evenly distributed weight, cantilevered legs, and folds for compact storage when not in use. This 18″ size table is typically used for seminars or training sessions. The blow molded plastic top has a better strength-to-weight ratio than solid plastic or wood tables, is UV protected to withstand sunlight during outdoor use, and can withstand heat up to 212 degrees F so it won’t be damaged by hot plates or coffee cups. The surface is lightly textured to increase scratch resistance, but is still smooth enough to write on. The gray steel legs are cantilevered and connected 11″ from the table edge to provide leg room, and are powder coated for corrosion resistance. When the legs are opened, snap locks engage automatically to keep them opened, releasing with a push button for folding. When folded, the legs nest flush into indentations in the bottom of the table, making a flat surface suitable for stacking multiple tables for compact storage. Plastic glides on the feet help protect floor surfaces.

Specifications

Overall dimensions, open	29-1/2 x 60 x 18 inches (H x W x D)
Weight supported	700 lb.
Frame material	18 gauge steel
Leg material	16 gauge steel
Weight	29 lb.

(H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)

(4 Pack) NPS 1200 Series Premium Vinyl Upholstered Double Hinge Folding Chair, Caviar Black Review

Folding chair with vinyl upholstered seat and backrest and steel frame for temporary seating and efficient storage when not in use
18 gauge, 7/8″ tubular steel frame supports 480 lb. static weight, 300 lb. drop weight
“Y-frame” structure, double-riveted front and rear leg cross braces, and double hinges on each side for stability
Vinyl upholstered seat and backrest for comfort, with 1-1/4″ thick, 0.9 lb. density foam in seat and 1.2 lb. density foam in backrest
0.8 mm thick vinyl is water resistant for easy cleaning

› See more product details

Color:Black/Black

The National Public Seating 1200 Series steel frame upholstered premium vinyl seat and back folding chair has a black, 18 gauge, 7/8″ tubular steel “Y-frame” structure, caviar black upholstered vinyl seat and backrest, double-riveted front and rear leg cross braces, double hinges on each side, and it folds for efficient storage when not in use. This chair meets the American National Standards Institute/Business & Institutional Furniture Manufacturers Association (ANSI/BIFMA) standard for drop weight support of 300 lb., and it supports 480 lb. of static weight. It has double-riveted front and rear leg cross braces and double hinges on each side for stability. The seat and backrest are upholstered for comfort, with 1-1/4″ thick, 0.9 lb. density foam in the seat and 1.2 lb. density foam in the backrest, and covered with 0.8 mm thick vinyl that is water resistant for easy cleaning. The seat has a rounded, “waterfall” front edge to help reduce pressure on the back of the knees. The steel frame is powder coated for corrosion resistance. Replaceable polypropylene glides help protect floor surfaces. Plastic plugs at the top of the back legs have a slot shaped to hold the frame and add stability. These plugs and the floor glides match the frame color. When folded, the chair fits very close to another of its kind for efficient storage, making it suitable for institutional temporary seating applications.

The chair is Materials Analytical Services (MAS) certified as low volatile organic compound (VOC) emitting furniture according to the criteria defined by U.S. Green Building Council (USGBC) Leadership in Energy & Environmental Design (LEED) 2009 for Schools, LEED 2009 for Commercial Interiors, ANSI/BIFMA X7.1-2011, ANSI/BIFMA e3-2011e Furniture Sustainability Standard – Section 7.6.1, and the MAS Certified Green program. The upholstery meets the flammability requirements of the California Bureau of Home Furnishings and Thermal Insulation Technical Bulletin 117 (TB117).

Specifications

Seat size	16 x 16 inches (W x D)
Seat height	17-3/4″
Backrest size	8-3/4 x 18-3/4 inches (H x W)
Overall dimensions, folded	38 x 18-3/4 x 2-1/2 inches (H x W x D)
Overall dimensions, open	29-1/2 x 18-3/4 x 20-1/4 inches (H x W x D)
Weight	11 lb.

(H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)

National Public Seating 2200 Series Steel Frame Upholstered Premium Fabric Seat and Back Folding Chair with Double Brace, 480 lbs Capacity, Imperial Blue/Gray (Carton of 4) Review

This fits your .

Make sure this fits by entering your model number.

Folding chair with fabric upholstered seat and backrest and steel frame for temporary seating and efficient storage when not in use
18 gauge, 7/8″ tubular steel frame supports 480 lb. static weight, 300 lb. drop weight
“Y-frame” structure, double-riveted front and rear leg cross braces, and double hinges on each side for stability
Upholstered seat and backrest for comfort, with 1-1/4″ thick, 0.9 lb. density foam in seat and 1.2 lb. density foam in backrest, covered with fabric abrasion tested to withstand 30,000 double rubs for durability under heavy use
Fabric treated with Scotchgard stain and water repellant to protect appearance

Color:Blue/Gray

The National Public Seating 2200 Series steel frame upholstered premium fabric seat and back folding chair has a gray, 18 gauge, 7/8″ tubular steel “Y-frame” structure, imperial blue upholstered fabric seat and backrest, double-riveted front and rear leg cross braces, double hinges on each side, and it folds for efficient storage when not in use. This chair meets the American National Standards Institute/Business & Institutional Furniture Manufacturers Association (ANSI/BIFMA) standard for drop weight support of 300 lb., and it supports 480 lb. of static weight. It has double-riveted front and rear leg cross braces and double hinges on each side for stability. The seat and backrest are upholstered for comfort, with 1-1/4″ thick, 0.9 lb. density foam in the seat and 1.2 lb. density foam in the backrest, and covered with fabric abrasion tested to withstand 30,000 double rubs for durability under heavy use (abrasion testing uses an oscillatory cylinder tester to rub an abradant in two directions against the fabric). The fabric is treated with Scotchgard stain and is water repellant to protect its appearance. The seat has a rounded, “waterfall” front edge to help reduce pressure on the back of the knees. The steel frame is powder coated for corrosion resistance. Replaceable polypropylene glides help protect floor surfaces. Plastic plugs at the top of the back legs have a slot shaped to hold the frame and add stability. These plugs and the floor glides match the frame color. When folded, the chair fits very close to another of its kind for efficient storage, making it suitable for institutional temporary seating applications.

Specifications

Seat size	16 x 16 inches (W x D)
Seat height	17-3/4″
Backrest size	8-3/4 x 18-3/4 inches (H x W)
Overall dimensions, folded	38 x 18-3/4 x 2-1/2 inches (H x W x D)
Overall dimensions, open	29-1/2 x 18-3/4 x 20-1/4 inches (H x W x D)
Weight	11 lb.

(H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)

(2 Pack) NPS 3200 Series Premium 2″ Vinyl Upholstered Double Hinge Folding Chair, Black Review

This fits your .

Make sure this fits by entering your model number.

COMFORT: The National Public Seating 3210 folding chair has a contoured back and a 2” upholstered box seat on a masonite board with 8 rivets to provide the utmost seating experience
STRENGTH: Our 3200 Series folding chair is made of durable 19-gauge steel and has 7/8″ tubular steel framing that supports 480 lb. static weight, 300 lb. drop weight. The “Y-frame” structure and double-riveted front and rear leg cross braces for stability. These features make this chair strong and durable. The frame is powder coated to give the chair protection against scratches and the matching glides and protection tips ensure that the chair will last for a long time without damaging your floor
STORAGE: Simply fold the chair to make it fit in any space. A mere 3.75″ thick when folded will make this chair fit in a closet, or any other narrow space
UTILITY: A metal folding chair can be used for a variety of occasions such as additional seating around the house, parties, graduations and much more
DURABILITY: Scotchguarded fabric is rated to 30,000 double rubs
WARRANTY: National Public Seating stands behind its products. Offering an industry leading 10 year full Warranty.

Color:Black

Our 3200 Series has brought the potential comfort of folding chair to a whole new level with a super-soft 2″ thick cushion. Features include an institutional-grade vinyl or fabric upholstered box seat on a masonite board. The large contoured padded backrests are fully covered in matching vinyl or Scotchgarded fabric on both sides. The institutional-grade frame is made from heavy-duty powder-coated 18-gauge round tubing with two U-shaped double-riveted cross-braces – one in front and one in the back – to securely support the double-hinged legs. Color-coordinated V-tip stability plugs provide added reinforcement at the frame’s junction and matching replaceable glides prevent floor damage. The 3200 Series meets MAS Certified Green and ANSI/BIFMA standards.